Authorized Dealer — New England
Milling & sewer rehab robot for pipe sizes ranging from DN 150 (lined) to a maximum of DN 300. Four degrees of freedom, four-wheel drive, pressurized interior, and a multifunctional tool holder — all areas of the sewer pipe are reachable.
The Talpa FSR 1330 is designed for pipes starting at DN 150 (lined) and can be equipped with wheel spacers and heavier weights to fit pipe sizes up to DN 300. The robot sits stably in the sewer pipe without requiring additional bracing or securing for milling operations. This is ensured by its heavy weight and low center of gravity. The Talpa FSR 1330 can be tilted more than 45° on both sides around its longitudinal axis without tipping over.
Four degrees of freedom — the equipped tool can reach all areas of the sewer pipe. Camera mounted on head, swivelable vertically with integrated rinse nozzle. Pressurized interior (0.2–0.3 bar) protects against water ingress. Multifunctional tool holder with compressed air supply. 30–45 kg, DN 150–300.
DN 150–300 · 6–12 in
Multifunctional tool holder with compressed air supplied via hose along the work arm. Motor stop (adjustable) prevents tool kick-back and protects the camera. Exhaust air guide diverts milling dust from the camera lens.
Multifunctional mount
Compatible with HutlinerPacker® for short liner and hat seal installation. Shown with DN 200 packer mounted. Strain relief and reverse control prevent cable damage while reversing. Hour meter for direct reading.
HutlinerPacker compatible
| Parameter | Talpa FSR 1330 |
|---|---|
| Length (with Digitalbox) | 1,085 mm (42.72 in) |
| Width (with narrow side weights) | 129 mm (5.08 in) |
| Height | 120 mm (4.72 in) |
| Overall Weight | 30–45 kg (66–99 lb) |
| Pipe Diameter Range | DN 150 (lined) – DN 300 |
| Imperial Pipe Range | 6–12 in |
| Carriage Drive | Four-wheel drive |
| Hydraulic Pressure | 60–80 bar (870–1,160 PSI) |
| Degrees of Freedom | 4 |
| Tilt Without Tipping | >45° both sides |
| Pressurized Interior | 0.2–0.3 bar overpressure |
| Camera | Head-mounted, swivelable vertically |
| Integrated Camera Rinse Nozzle | Yes |
| Chisel Hammer Compatible | No |
| HutlinerPacker Adapter | Yes |
Official Schwalm Robotic system overview video.
The bigger brother — for pipe sizes DN 200 (lined) to DN 600. Chisel hammer compatible, dedicated HutlinerPacker adapter plate. 45–100 kg.
Patent-protected solution to place short liners and hat seals. Available for main pipe DN 100 to DN 800. Flexible packer body for curved shafts.
Authorized New England dealer — full parts support and factory-trained repair.